| |
Q&A from and for Members
|
By |
Responses |
Views |
Last Updated |
|
|
[+/-]
Need Orbit driver 11.5
where can i get the 11.5 drivers and how to install them?? thank you ..
Almost every driver Logitech has ever released is on their FTP server.
ftp://ftp.logitech.com/pub/techsupport/quickcam/..
From MelvinG:
Almost every driver Logitech has ever released is on their FTP server.
ftp://ftp.logitech.com/pub/techsupport/quickcam/
i tried that, ..
There is no "trick" to driver installation that I know of. All I do is run the installer .exe - really!
You are correct that the Pro9000 CD or downlo..
crap is a P/N 861116-0030 which by the driver compatibility chart only can have 8.4 and 10.5, so no red light off for me, will have to get a newer mo..
No problem...
Wow - your cam is an "Original" Orbit/Sphere then, even older than an MP. I would think it will still work with AbelCam in a limited w..
|
GitanoMa
|
5
|
3354
|
03/26/2010 - 01:27 AM
By
MelvinG
|
|
|
[+/-]
Logitech Orbit AF Problems..
Hi just got a QuickCam Orbit AF and I am having problems getting it to work with VideoCapX..
keeps telling giving me
Cam QuickCam Orbit/Sphere AF-1 ..
Well, my first question is: what happens if you try using TyCapture or VisioForge instead? Or for that matter, what happens if you try to view your ca..
I am having this same issue. I have tried to use the VideoCapX, and it initially works. However after i changed the input and output it will nto work ..
1) I've noticed that Logitech cameras + recent drivers can be a bit "funny" about framerate/resolution combinations. Has nothing to do with AbelCam - ..
hi MelvinG please help me!!!
i know this is not the right post but on the "SOLVED: Can I turn off the red "record on" light?" u were able to install a..
I will try some other configurations. I was just trying to make things more smooth. I am only getting 1 or 2 fps. sometimes it jumps to 10. It is quit..
Playing with settings is really the only way to go on this. I've had plenty of cases where combinations of settings that are supposed to work (per cam..
|
TravisJo
|
6
|
3917
|
03/25/2010 - 05:50 AM
By
MelvinG
|
|
|
[+/-]
Streaming just stops
I can't figure this out? It doesn't appear anyone else is having this issue and I've tried to serach however the quick search returns no results - n ..
For support please see the Support Page
Your issue has been answered today...
|
HowiserS
|
1
|
2868
|
03/19/2010 - 08:20 PM
By
sse
|
|
|
[+/-]
Upload image before going offline feature is not working.
I am sending ftp images at an interval of five seconds and that is working fine. When I shutdown Abelcam, the "Offline" image that I chose in the path ..
You need to deactivate or remove the camera before closing AbelCam for the offline image to be uploaded...
|
RonaldRu
|
1
|
3043
|
03/08/2010 - 11:09 AM
By
sse
|
|
|
[+/-]
AbelCam Quit Working
When I upgraded AbelCam it had a larger resolution than it said in the configuation, I could not change it to what I wanted since AbelCam claimed it w ..
Uninstall and reinstall it I guess...
Hello Gerry
reinstalling AbelCam won't change the configuration.
The best way to resolve camera configuration problems is to rename the cameras conf..
|
GerryH
|
2
|
2615
|
03/05/2010 - 04:23 PM
By
sse
|
|
|
[+/-]
Spam?
I tried to write a mail to support, but got it back as it was considered spam. My mail address is ingesvensson at orion.vokby.se ..
Hello Inge
I have changed the spam detection rules - try again, now it should get through...
i also get support messages in my spambox. i added the domain abelcam.com to safe sender list. this seems to work . but i wonder why it gets treated a..
|
IngeS
|
2
|
2643
|
02/28/2010 - 07:07 PM
By
JojoY
|
|
|
[+/-]
JPEG2Video Error
Hi, I'm running 3.2.3 Pro version and archive collected jpegs into a .wmv file. Every so often I get errors after running JPEG2Videoc. I can repeat ..
Hello Pete
this error is caused by the progress bar.
Does it make sense to create a video with just one image?
I will fix this for the next release.
..
Hello
I use the command line JPEG2Videoc to make a video file, every 4 hours, from a series of jpegs taken every minute. When I check my script, I..
The command line version runs the GUI version invisible.
The latest version available from the members only section has this bug corrected - untested..
Looks good, thanks, it's apreciated.
..
|
Pete
|
4
|
3182
|
02/23/2010 - 12:34 PM
By
Pete
|
|
|
Unable to use TyCapture with PS3Eye Camera
Hello All,
I am running Windows XP Sp3 on Dell 655 COre2Duo with 4GB RAM.
I was using Abelcam 3.2.3 perfectly with Creative Live Motion Camera and a ..
|
SyedF
|
0
|
2781
|
02/22/2010 - 06:07 AM
By
SyedF
|
|
|
[+/-]
TV Tuner startup / Overlay Image
When AbelCam Pro starts it has this message box first that must be clicked:
TV Tuner Detected
In the Config Form, run Auto Tune
to creat the channel ..
Off the top of my head I'd say you should just go along with it: go into config for the tuner/capture card device and in the TV options there should b..
Yes that worked, It was on tuner after that and I couldn't get back to composite right away. There was no configuration on the webpage until I found t..
Ahh... gif to bmp on the overlays... I didn't even think about that as a possibility. I'm not sure which image formats are officially supposed to work..
I've discovered something new. If the transparency is set when you change the overlay, it seem to crop the picture until you set it back to zero. Then..
|
GerryH
|
4
|
2552
|
02/15/2010 - 11:34 PM
By
GerryH
|
|
|
[+/-]
username, password & ftp address
What do i write for ftp & email configuration & how do i access my recorded video from the other server ? ..
Configure FTP Upload
Email on Motion Detection
Video Save
You cannot access saved video from other computers except through a share - not through A..
|
IsabelF
|
1
|
2838
|
02/11/2010 - 03:55 PM
By
sse
|
|
|
[+/-]
Where are the configuration XML files stored.
Hello ,
I have accidentally made some configuration changes , which are making abelcam crash on my PC with Windows XP Sp3. The Abelcam starts minimiz ..
c:\documents and settings\all users\application data\seiz system engineering\abelcam\..
|
SyedF
|
1
|
2708
|
01/31/2010 - 04:11 PM
By
MelvinG
|
|
|
[+/-]
This version has reached it's lifetime end, download the latest version, please.
I got this pop up window when abelcam tried to restart this morning. I did as it said and updated to the latest version but it keeps saying my camer ..
No ideas? I have to leave town this weekend (sunday) and really really need my camera to be recording. I don't know why I had to update or why it's ..
Joshua, please send me your configuration information and a debug log as outlined in Support..
OK, sending now.....
|
JoshuaW
|
3
|
2589
|
01/31/2010 - 02:25 AM
By
JoshuaW
|
|
|
[+/-]
multiple computers on home wireless network
do I have to have ablecam on both computers. I'm having prob with our 2 wire router I think. but have to ask the elementary first. ..
I don't know... what is it you're trying to do?
If you have cameras plugged into both computers then yes, you either need AbelCam on both or AbelCam ..
|
PatL
|
1
|
2340
|
01/26/2010 - 07:28 PM
By
MelvinG
|
|
|
[+/-]
Using FTP
I have AbelCam set to upload to an FTP server and have a few questions:
How can the Camera source which is uploaded be selected?
Can the FTP upload o ..
How can the Camera source which is uploaded be selected?The FTP configuration is in the camera configuration tree -> the camera has been selected a..
I actually figured this out shortly after posting. One question I have is, is the FTP feature solely based on motion or can it be either motion or tim..
Please see Wiki and Online Help
Once motion detection is enabled, the image with the highest motion level (if any) is uploaded when the time has pass..
Is there any way to rotate which camera gets uploaded at each time interval so that the images flip through all of the cameras in sequence rather than..
|
SpyrithonasN
|
4
|
2661
|
01/23/2010 - 09:18 PM
By
JohnMa
|
|
|
[+/-]
JPEG2Video problems
I have a Pro license with an additional camera license.
When I try to use Jpeg2video to process images, jpeg2video reports only one image in the spec ..
You are remembering to click the Count button after choosing the directory, right??
I just did a little test here and jpeg2video works almost fine. ..
Thanks for your help Melvin.
Yes, I am clicking Count after I select the directory. There are several hundred photos and still only counts one image...
Hmmm... then I have no idea. I tested on XP Pro SP-3 (32 bit). If you're running a different O/S then post which one it is and hopefully somebody with..
I just found this error in the event viewer. Not to sure what to make of it....
Event Type: Error
Event Source: .NET Runtime 2.0 Error Reporting
Eve..
I don't know what to make of that either but it sure does look like it's related to the problem you're having. I have no .NET events at all in my even..
XP w/ SP3..
On my system, the jpeg2video user interface is displaying "JPEG2Video licensed to Melvin Gxxxxxxxx" right above the Exit button. If yours is displayin..
I have all updates.... but I have been having a sporadic system error since I installed the cameras. Two Logitech Orbits.
If it's not licensing, the..
Spyrithonas, did you install the VideoCapX capture module when you installed AbelCam?
The only reason for JPEG2Video to behave weird is if that captur..
I did install the VideoCapX when I installed AbelCam. To check whether the issue was machine related I also installed on another machine and have the ..
So, what now? ..
I can not fix a problem I can't reproduce - so what do you want me to do about this?..
Refund my money and keep your software? This doesn't work. The network agent doesn't work. Your licensing restrictions are too restrictive and expensi..
|
SpyrithonasN
|
13
|
5607
|
01/23/2010 - 03:28 AM
By
SpyrithonasN
|
|
|
[+/-]
Adding additional Camera to Free License : PS3eye and Creative LiveMotion
Hello All,
Thanks for helping me in setting the WebServer. I have tried logging into it and it seems to work fine with one camera which is PS3eye wit ..
I have another camera which I hooked up to USB. It is a Creative Live Motion Webcam (Pan/Tilt). I tried to add this camera in AbelCam but the software..
|
SyedF
|
1
|
2442
|
01/19/2010 - 04:29 PM
By
sse
|
|
|
[+/-]
How to setup the basic WebServer to view Still Pics or the Live Camera Motion Streams
Hello ,
I am novice. I have downloaded and installed free licenses of AbelCam 3.2.2 running on Windows XPO Sp3. I am connected to the internet via DS ..
Make sure you uncheck / recheck then Web Server Checkbox after changing the port.
While you can change the configuration of the port with the box chec..
|
SyedF
|
1
|
2513
|
01/18/2010 - 09:46 AM
By
sse
|
|
|
[+/-]
Pro License disabled
I purchased Abelcam because it is stable. Once you figure out how the software is laid out, it is very useful and purposeful.
That being said, there ..
The biggest problem is if I run Abelcam without an internet connection it disables itself. This is a problem. There should be some way to stop this fr..
|
SpyrithonasN
|
1
|
2344
|
01/12/2010 - 11:22 AM
By
sse
|
|
|
[+/-]
Logitech Orbit Follow motion feature having opposite effect
Initially I had the PTZ controls set to inverted. I turned on the follow motion feature and it had the opposite effect. The camera moved away from mot ..
I just went and tested Follow Motion on my Orbit AF. It worked correctly. I have NO invert boxes checked, regular PTZ control from Web works fine and ..
Hmm, I did have an out dated driver which is now updated but, the problem remains?
I am running the latest Abelcam.......
Please check your C:\program files\camcontrol.dll. It should be Version 1.6.0.1, dile date = 12/21/2009, file size 68.5 KB (70,144 bytes). If it does ..
Thanks Melvin. That seems to have resolved this issue. Now if I could get Jpeg2video working....
..
Okay, good... I thought all the reversal / inversion stuff got sorted out in the newest camcontrol.dll and apparently it did. The problem was that Lo..
It is good that it is working although it would be great if it were a little better/faster at tracking.
As for jpeg2video, it may be an OS problem. B..
I imagine the follow motion sensitivity / speed is a compromise: sensitive enough to react to "major" motion but not twitch around on every tiny bit o..
|
SpyrithonasN
|
7
|
3029
|
01/11/2010 - 11:05 PM
By
MelvinG
|
|
|
[+/-]
PTZ - Mirrored Horizontally and Vertically
Hello.
I have set up my Logitech QuickCam Orbit/Sphere AF, and the PTZ box is mirrored, so when I click for it to move left, it moves right and when ..
Hello Christine
this is a 'feature' of the latest Logitech drivers - they inverted the PTZ moves.
Also the zoom does not work the same way as it did..
For clarity let me just add that you should uncheck any Image Mirroring boxes you may have checked in Size & Orientation settings. Then do what SSE sa..
AbelCam 3.2.2 Release 2009-12-23 now supports the latest Logitech drivers - download from the Members Only section..
|
ChristineB
|
3
|
4729
|
01/04/2010 - 04:51 PM
By
MarianO
|
