| |
Software Versions
|
By |
Responses |
Views |
Last Updated |
|
|
[+/-]
Logisphere 0.9.5 released to Members
New Features:
authentication
set passwords in various levels
use authentication in applets
web administration interface
control d ..
Yay on passwords...
I added some documentation in http://logisphere.seiz.ch/en/membersonly/096
Please let me know if the documentation is sufficient
The Web Admin Inter..
I've noticed on the serverside chat window if you resize the window (say, maximize) then restore the window to any smaller size, when the chat lines r..
Yay for the remote admin capabilities ! Minor grumbles from me:
1) startup gives "cam device must be started" and the local save is not started by d..
-I have "Local save active" and "Web server" actived
-Shortcut to Logisphere in "Startup"
And when I start my computer Logisphere says "Cam device mu..
Hi Pete,
going through the problems you mentioned
1) startup gives "cam device must be started" and the local save is not started by defaul..
Logisphere doesn't remember which output size I have choosed, If I choose 352x288, saves and close, and starts Logisphere again, it's back to 320x240...
|
sse
|
7
|
2555
|
09/01/2005 - 09:33 AM
By
Marcus
|
|
|
[+/-]
LogiSphere 0.9.4 released to Members
Fixes:
Chat works ok when chat window on server end is minimized
Chat Window opens on saved position
New Feature:
Chat users are listed on bo ..
Hi ! I installed 094, and have made it hang up a couple of times, the selfcheck seems to be working well, good work ! (You might just want to check ..
|
sse
|
1
|
2128
|
08/20/2005 - 12:49 PM
By
Pete
|
|
|
[+/-]
LogiSphere 0.9.2 released to Members
chat
Lots of new Attributes in config.txt:
Chat Enabled = True
Chat Log = True
Chat Username = TheOwner
Chat Logfile = chatlog.txt
Chat Login Sound ..
Just noticed - if you minimize the chat window, the history will only be 2 lines...
Better close it and disable the chat instead of minimizing it ..
Things are working great. I looked through the Java apps and cant find the part for the 3 min timeout.. I really want to be able to adjust it to unlim..
the timeout is on the server side, not the client.
On the Devices Page, check out for 'Max Motion JPEG timeout', there's a 'no limit' checkbox
check..
|
sse
|
3
|
2271
|
08/18/2005 - 03:42 PM
By
sse
|
|
|
[+/-]
LogiSphere 0.9.1 released
Fixed positioning issues ..
Sweet - all looks good - will do some more testing, I'll let ya know if I find anything..
Hi ! Maybe a problem.. 0.9.1 starts up OK for me, but if I disable and then re-enable the web server
I get an error about my picture size is 32K, and ..
Hi Pete
you discovered a feature of the LogiSphere server, not the software you use.
When you get listed, it verifies the picture size to make sure ..
Doesn't seem to be a link to 0.9.1 on the members dl page.. ..
Thanks Stefan, I changed it to your settings, it looka a little more grainy, but probably is faster.
I have a problem with the motion jpeg, but can'..
The problem is the Java Applet which is not prepared for the stream to end and does not do a correct 'hangup'.
It's on my list of things to be fixed....
From Bill:
Doesn't seem to be a link to 0.9.1 on the members dl page.. As 0.9.1 is the only version available right now (both for public and Members),..
Ok, now 0.9.1 doesn't see my camera on either of the computers I use for testing.. the drop down box for the camera "select camera" is empty.. It ha..
Bill, did you uninstall the previous version before installing 0.9.1?..
no.
prev version was 0.8.9 ..
the Upgrading Instructions state clearly that you have to uninstall a previous version.....
|
sse
|
11
|
4855
|
08/12/2005 - 05:38 PM
By
sse
|
|
|
[+/-]
LogiSphere 0.9.0 released
New Features:
- step delay configurable
- max / min values for tilt / pan configurable
- LogiSphere checks picture size for Listed camers (all versio ..
Upgraded to 0.9.0 (from 0.8.9) Followed the upgrade procedures posted on the download page and everything works fine. Currently testing new version. ..
(comments moved to absolute thread)..
Hi ! I upgraded to 0.9.0 today, but had noticed that the older (0.8.6) had caused the machine
to boot a few times before. I bumped into 2 problems: ..
If 2 clients simultaneously (on different computers) access the motion jpeg, logisphere
seems to diconnect one or the other.
Can anybody confirm t..
|
sse
|
4
|
2183
|
08/02/2005 - 07:06 AM
By
sse
|
|
|
[+/-]
LogiSphere 0.8.9 released to Members
Added feature:
- optional audio feedback on server access
Fixes:
- right move counts right
- License dialogue behaves as expected ..
Is the audio feedback used to play a sound when someone grabs a frame? I have this feature checked but get no sound.
I noticed the feature after inst..
Harold, on 0.8.9 there is a file hit.wav which is played on every web server access.
You have to start LogiSphere from its program directory, or it w..
One little thing - the balloon help for Audio Feedback is the same as the Show Contry Request ("check this to see the caller country....")..
oh - I have been caught
Thanks..
Ok, I have the Audio Feedback working now. I didn't have the logfile box checked. As soon as I checked the logfile box in the options panel the sound..
|
sse
|
5
|
2185
|
07/23/2005 - 11:57 PM
By
Harold
|
|
|
[+/-]
LogiSphere 0.8.8 unreleased
new features in the works:
- framerate for motion replay can be set independant of the live frame rate (thanks Pete )
- optionally motion detection ..
If I knew who you are maybe I could help
Hit TAB after entering the license and you will be able to save it
I will look into the problem with the l..
well when I started posting it showed up as anonymous, don't know why ..
I was having a problem putting in the license in the 0.8.8 version. I would type in the text and the save button would never highlight. I tried enter/..
|
sse
|
3
|
2141
|
07/22/2005 - 05:35 PM
By
sse
|
|
|
[+/-]
LogiSphere 0.8.6 released to Members
this is a bug fix release only - to know what changed check the 0.8.5 thread
Thanks to everybody to let me know about problems - continue hunting
L ..
Release fix of all bug above as 0.8.6
0.8.6 Will not run on my computer...
Logisphere086.exe- Common Language runtime debugging services.
Applicatio..
Ouch - I uploaded an outdated version as LogiSphere086.exe...
This is fixed now, the link above is LogiSphere 0.8.6 now, sorry about that..
I wonder how the country detection works out there.
For me it does not work at all, as my cameras are behind an apache web server which does not forw..
I have the same problem as Bill.. But using 0.8.5 today (12/07/05) 12 CET I tried to restart logisphere and got:
"the remote name could not be resol..
Just a comment (after reading the documentation) I notice the motion replay function plays back a certain number
of saved frames, but at the same rat..
Here's a sorta bug I think...
#1. I have two network cards in my computer at home.
Under the options tab in the "Server ip:" box it has the ip for th..
From Pete:
I notice the motion replay function plays back a certain number
of saved frames, but at the same rate as the framerate in the devices secti..
Hi Bill,
thank you for your report. Hope this helps:
#1. I have two network cards in my computer at home.
Under the options tab in the "Ser..
Hello I didn't have much time to debug but as I read there's a new version coming, I'd like to add:
1) A funny "Active Motion Windows" sits on the t..
1) I suspect this is the new DirectX release - did you install 9.0c? On my Windows 2000 Computers it also showed up,
on one of them it shows up on cam..
If motion detection is enabled, but the cam is moved wouldn't this be detected as
motion (i.e not motion *in* the picture) Perhaps it should be disa..
8.6 still has same error message.. how long til 8.8 maybe Ill wait....
|
sse
|
12
|
4888
|
07/14/2005 - 08:45 PM
By
Bill
|
|
|
[+/-]
LogiSphere 0.8.5 released to Members
This version should be released to Members on Friday July 8th 2005
Working on the absolute positioning
there will be a new web command:
http://loc ..
found a bug in the java/absolute/index.html page
after the line
<applet code=logiabs.class width="186" height="130" codebase="/java/absolute/">..
just found another one - the zoom buttons on the device page were not to be released - I know they don't work (yet) ..
and another one
Licence entry from within the program is not possible, as the save button remains grayed out even with a valid license key...
So far..
Minimize to tray has been removed for debugging purposes - missing in 0.8.5
It will be back in future versions..
the Listed checkbox was not treated correctly - switching from listed to unlisted might not have worked as expected.
Release fix of all bug above as ..
all following messages moved to thread LogiSphere 0.8.6..
|
sse
|
6
|
2174
|
07/12/2005 - 06:47 PM
By
sse
|
|
|
[+/-]
LogiSphere 0.8.1 released
Fixes:
- ftp upload for both motion detection and regular intervals
- better validation of entries in the Storage page
- improved synch of twin butto ..
I spotted a bug when trying to post my cam. Results in a nasty situation when I have to reboot
the computer by HAND If the config has:
WebCamPage ..
Pete,
your cam looks great!
What am I looking at there?
Thank you for your valuable feedback.
In your example not only the port is or can be wrong, b..
|
sse
|
2
|
2083
|
07/05/2005 - 12:18 PM
By
sse
|
|
|
[+/-]
LogiSphere 0.7.9b released to Members
fixed the error Bill found...
Vserver profile selection caused the error
no more for today... ..
Hi Stefan, here's my buglist/questions/suggestions for 0.7.9b, testing with IE and firefox..
1) I can't seem to control the sphere. Using the "test ..
Pete,
thank your for your testing.
I will check this out on monday.
Stefan
..
As mailed on Jun 20th, added now to complete this thread
1) The AutoSphere button may choose the wrong entry - controls work if
the correct entry is..
Hi ! After a break, I have gone back to looking at the LogiSphere and the problems I had. After some head-scratching,
and installing a sound card I ..
whilst I'm here, if I call http://localhost:8080/javascript/down-20 the reply is:
processing 10 moves towards /javascript/down
is 10 the max or does..
|
sse
|
5
|
2059
|
07/04/2005 - 07:20 PM
By
Pete
|
|
|
[+/-]
Old Bug found
Today I installed LogiSphere 0.8.1 on a fresh W2K system
and was surprised it produced nothing but en error message.
I tried older versions, 0.7.0 w ..
Relief - I figured out what the problem was.
The media player has to be installed, as the vserver option requires the wmvcore.dll file.
Future versio..
|
sse
|
1
|
2103
|
07/03/2005 - 11:38 PM
By
sse
|
|
|
[+/-]
LogiSphere 0.8.0 released
after receiving no negative feedback about LogiSphere 0.7.9d, I changed this
to be the released version 0.8.0
There are no changes in the program, b ..
Known bugs:
- FTP upload does not work correctly
- on the Storage page some input field validation is weird
paste your values if you can't enter ..
|
admin
|
1
|
2115
|
06/23/2005 - 04:56 PM
By
sse
|
|
|
LogiSphere 0.7.9d unreleased
LogiSphere now stops motion jpeg streaming when the client disconnects.
A new checkbox no limit on the Devices page allows motion jpeg without settin ..
|
sse
|
0
|
2220
|
06/20/2005 - 03:36 PM
By
sse
|
|
|
[+/-]
LogiSphere 0.7.9 unreleased
Fixes
Supervisor
in 0.7.8 I introduced a supervision feature which will cancel a connection when
a connection is _not terminated_ within 10 second ..
Motion Jpeg is the smootest of the video that you have done so far.. Looks great.. Is there anyway to not limit the max frames? I would like to just ..
Thank you for your feedback
Yes, you can limit the number of frames transmitted on the Devices page,
the entry field is called Max Motion JPEG fram..
Actually I was wanting to NOT limit the max frames... Any ideas?
..
Ok, 0.7.9b is ready for download.....
From Bill:
Actually I was wanting to NOT limit the max frames... Any ideas?
enter 9999999999 - bigger numbers cause a error
you could also add a m..
|
sse
|
5
|
2362
|
06/16/2005 - 07:29 PM
By
sse
|
|
|
LogiSphere 0.7.9a unreleased
A bug in the validation of the name field (Options page) prevented any entry...
Get LogiSphere079a from the Members page ..
|
sse
|
0
|
2251
|
06/16/2005 - 07:04 PM
By
sse
|
|
|
[+/-]
LogiSphere 0.7.8 unreleased
New Features
replay detected motion
new entry field in Storage page,
makes sense only with Time based name
http://localhost:8080/motion.mjpg ..
Hi there
I was eager to use the new features, but all I get from the freshly installed 0.7.8 is a
error message before even anything shows up - what..
Hi Ben
there must be some interference with previous installations of the software.
the format of config.txt has been changed, that could cause troub..
Hi sse
Did as you suggested, and now it's working fine.
I like the new features, caption looks good and the motion replay works
Ben..
Bug found
I added connection supervision which closes a connection after 10 seconds to make sure there are no idle connections hanging around.
Unfort..
|
sse
|
4
|
2054
|
06/16/2005 - 12:03 PM
By
sse
|
|
|
LogiSphere 0.7.6 unreleased
bug fixes:
- 404 error messages
- some internal commands were not available, eg. Sphere motion
new:
- motion jpeg for motion detection snaps ..
|
sse
|
0
|
2067
|
06/13/2005 - 05:37 PM
By
sse
|
|
|
[+/-]
LogiSphere 0.7.5 unreleased
Another complete rewrite of the web engine. Fully configurable pool of threads now handles any number of concurrent requests.
Event driven reporting ..
May I have this release?
Thanks,
Jean..
As soon as it is ready to be released to registered users, you will get a notification by email.
..
Looks like 0.7.5 is workin well with IE. The recoding has made a big difference. Things I notice with 0.7.5:
1) Quitting the LogiSphere window lea..
|
sse
|
3
|
2057
|
06/13/2005 - 06:30 PM
By
Pete
|
|
|
[+/-]
LogiSphere 0.7.4 released
Fixed bugs:
- save config had a missing newline after the Video Server entry
- fixed unreliable picture delivery
New Features
- send email ..
After installing 0.7.4, I notice when viewing from a remote computer that the web delivery is still a little flakey (try reloading http://<server&g..
|
sse
|
1
|
1991
|
06/08/2005 - 11:44 AM
By
sse
|
