AbelCam WebCam Software Forum

Forum Home / WebCam Information / Drivers / Reviews

10 Topic(s) Found

This forum is a moderated forum, your topic submission may not appear immediately after adding the topic

WebCam Information / Drivers / Reviews	By	Responses	Views	Last Updated
[+/-] IP wireless webcam TRENDnet model TV-IP851WIC Hello, I need to configure this TRENDnet webcam model TV-IP851WIC but it doesn't work. Is there anyone who uses this webcam, or similar TRENnet webca .. What's the problem: can't get video? Or video okay but no PTZ? I have used a similar (older) TrendNET cam (TV-IP410 I think) and could probably dig up.. Okay, rather than wait for your response I went and looked up the info for my TV-IP410. I can't guarantee this will work for your cam, but my 410 seem.. Thanks, but doesn't work. I receive the following error: "Error in get_picture: Errore del server remoto: (404) Non trovato." "Error in get_picture.. I looked around the Internet a bit. Seems like Trendnet uses a different video URL for just about every model. :-/ The people over at Zoneminder have .. Thank you very much MelvinG. I will follow your suggestion and if I found a solution I'll post here. ..	LaraM	5	5985	05/15/2013 - 01:15 PM By LaraM
[+/-] AbelCam PTZ Orbit : Making clicking noise Hi all, Just plugged in my abelcam orbit camera, notice on the host machine it continues to make a clickign noise, say every half second. Almost soun .. Did you just plug the camera (Logitech Orbit, not AbelCam Orbit, I guess) or are you running AbelCam?..	ChrisH	1	6764	02/13/2013 - 08:24 PM By sse
[+/-] TENVIS JPT 3815W Newbie I'v entered the UTRL http://192.168.1.239:81/index1.htme into the Web Video URL box. Entered admin and no password as per login with login to .. I'm not sure of the exact URL you need to use for that camera. But I can guarantee that "/index.htme" or "index.anything" is not right. It's going to .. Thanks for replying MelvinG I 've had a look at the web page source code but I know nothing about HTML or Java. I found a line including - scrip.. Hmmm. I finally got some free time (I've been in the midst of moving house for what feels like eternity) and Googled a bit about your camera. I did no..	SteveRa	3	11956	10/18/2012 - 12:24 PM By MelvinG
[+/-] AV Tech Anyone here using AV Tech camera's ? OUTDOOR: IP AVN362 1.3 Megapixel H.264 Netwerk Camera +- € 315 INDOOR: AVN80X IVS 1.3 Megapixel beveiligings Net .. Ordered 2x outdoor AVN362 and 2x indoor AVN80X, I hope I can make the MJPEG streams work with Abelcam ...	PhilippeOl	1	4598	12/19/2011 - 10:59 AM By PhilippeOl
[+/-] Foscam Cameras Anyone here using them ? They cost like nothing, € 95 for a 640x480 15fps outdoor IP cam with wifi... FI8904W http://www.foscam.nl/index.php/winkel/b .. The problem I see here is that AbelCam does not support H.264 streams at this time. .. Wow, that's indeed a good remark ! @ sse, is H.264 support planned in the future ?.. Yes, planned - but no release date for that feature yet. Probably the camera can deliver simple JPEGs as well - which will work for AbelCam.. A friend and I will order 8 of them and also 2 of their speeddomes with 10x optical zoom . I will post my results regarding image quality and fps... Foscam is still postponing the release of the H.264 models...	PhilippeOl	5	6583	12/14/2011 - 10:36 AM By PhilippeOl
[+/-] Maximum Lenth of usb cable cam-usbport i´m using a labtec 5500 usb cam with comes with 1 meter usb cable. it´s a very simple camera, no features exept microphone build in. the cable is too .. "Official" maximum length is 5 meters. With Logitech cameras I start having intermittent problems if I use more than about 2 meters. Logitech cams hav.. The best please I have found for cables is Monoprice.com I'm currently using a 32 foot USB extender that Monoprice sells for $8.46.. Just to see how far this would work... I went to a 49 foot Monoprice repeater, then added a 10 foot cable, followed by the 6 foot cord to the camera. .. Just out of curiosity, what sort of cam do you have out on the end of that 60+ feet of cable? The ultimate test of a USB extender is to put an Orbit .. you may use as many active(!) extenders as u need - but think about the limitation to 500mA on your USB port! .. No problem thus far. Still way under max power for the port, but thanks for the tip...	KarlSe	6	6575	12/09/2011 - 09:39 PM By DerekJa
[+/-] Request for information from Logitech rejected Last week I went to the Logitech Sales office near here and asked for technical information to be able to support their cameras better with my softwa .. Yeah they have to be happy because if this programm not was made i was very disapointed!! I thought the software included it! my brother has an 4000 (.. I concur w/ Derek - the usefulness of my Orbit is about 100 times more than it was before logisphere. It's a perfectly good webcam but Logitech's par.. There's only one way to answer this. Don't buy Logitech products. I know I won't do again... This might be a silly question. But Stefan, you do have the quickcam 1.0 SDK dont you? I was not clear from what I have read. But I guess it should b.. Dennis, I do have it. It's very outdated and does not help with Logitech cameras you can buy these days... My Logitech cameras were getting dusty, then I discovered LogiSphere. I have had more fun with LogiSphere than ANY previous 'packaged' software I have.. I am going to use the word "assholes". If it hadn't been for Logisphere software - there is not much extra utility from this camera that cannot be ob.. I am also very disappointed with their (Logitech) response. The only reason I had purchase their web cam (Orbit MP) was with the hopes of having an ex.. Hello Stefan, I would like to access the logitech camera using it for some research in robotics. Could you give me the library for accessing the camer.. I would like to access the logitech camera using it for some research in robotics. Could you give me the library for accessing the camera? You would h.. Where is the source code? Then by osmosis the problem is solved... I would not have brought my logitech sphere if it wasn't for the logisphere software! I downloaded it first, loved it so brought the cam (wrong way ar.. That said, just read a license post and there is a timeout on your software. LAME! I will be taking my cam back for a refund and uninstalling the sof.. From Anonymous User: That said, just read a license post and there is a timeout on your software. LAME! I will be taking my cam back for a refund and.. Anonymous, My grass needs to be cut and my hedges trimed. Could you come and take care of that for me for free please? Thanks. Dennis.. BTW a little wish list for a future product: Could you build in some sort of configurable automatic pan and tilt for security? For example, so I coul.. I also downloaded your software before buying the camera and that was enough to make me buy it. Logitech, take note!.. I am appalled at Logitech's attitude, it was LogiSphere that made the camera work for me, the Logitech supplied software was pretty basic. If IBM had.. From Anonymous User: That said, just read a license post and there is a timeout on your software. LAME! I will be taking my cam back for a refund and.. You wrote a great piece of software and I really hope for you that it will be generating enough money to make a living out of it. I gladly paid the €3.. From RonaldoC: I am also very disappointed with their (Logitech) response. The only reason I had purchase their web cam (Orbit MP) was with the hopes .. I can understand Logitech not wanting to commit resources to upgrading the software but why leave customers hanging when someone else is willing to co.. When i encountered problems with my microsoft HD cams i got the recommendation to buy some logitech - god bless, i did not! ..	sse	23	25653	12/09/2011 - 08:27 PM By ChristianKa
[+/-] Loftek IP WebCam Compatiblity Question Hello, I am planning to buy Loftek IP WebCam as follows: http://www.amazon.com/LOFTEK-Newest-CXS-2200-Wireless/dp/B004GWQBWY/ref=sr_1_1?ie=UTF8&qid .. Since nobody has answered you, I did some looking around online: checked the official docs at loftek.us and checked all the usual unofficial places to..	SyedF	1	6729	07/14/2011 - 07:14 AM By MelvinG
[+/-] Issues setting up Foscam fi8908 / fi8908w ip camera I'm new to this forum and a recent AbelCam user. However, I'm having a heck of a time trying to set up my Foscam fi8908 ip cameras (3 of them). Has an .. Hi Pete. I using 7 of them and have no problem to set them up. You must connect them direct to the LAN first by cable and then install/run the program.. Hi Gorm! Thx for your response.I have them directly connected via Cat 5e, however, I'm not quite sure which program you are saying to "install/run the.. From PeterAl: I did the following: In Cameras --> Add Cam --> WebVideo --> Config --> Capture Device --> WebVideo URL --> Input my .. Melvin! You ARE DA BOMB! I went into my native html page for my device and looked at the html source and I found that the addy is http://192.168.x.xx.. Hi Pete. In the Abelcam server I capture as webvideo http://xxxxxxxx.dyndns.org:xxxx/snapshot.cgi JPEG / sync OR http://xxxxxxxx.dyndns.org:xxxx .. If someone likes to make a try with the PTZ setup in abelcam please feel free http://phuketcam.dyndns.org:8088/ User login as operator are "guest" or.. Well... I looked at Gorm's cam and I now understand how the PTZ commands work. But there is a problem: this cam uses a system that I have never seen b.. Hello Melvin We were doing the same analysis at about the same time... I'll update the IP PTZ code to support the following URL config: URL1;delay;UR.. Gorm, the feature mentioned above is now available in the latest Beta Release. I did not have time to try it on your camera. If you don't manage to c..	PeterAl	9	13711	02/04/2011 - 07:21 PM By sse
Logitech driver incompatibility I have purchased a Logitech C270 because the specs seemed fine compared to the price. Then I run straight into driver hell. That system (Windows 7 6 ..	sse	0	2802	11/29/2010 - 05:21 PM By sse