| |
Software Versions
|
By |
Responses |
Views |
Last Updated |
|
|
[+/-]
Working on LogiSphere 1.0.0 - License change
From the beginning of this project, I wanted LogiSphere to contribute to my income.
Although I have received some donations,
the rate was not high en ..
Worked hard on LogiSphere this month.
Schedule
released to the Selected Few today, including Pro License
If they don't find problems, this version w..
I have been through the program again, so here's my buglist for 1.0:
1) On startup I get "local save / cam device must be started"..
2) Disabling t..
Hi Pete,
1) On startup I get "local save / cam device must be started"..fixed
2) Disabling the "lazy cam" when running hangs the logisphere programco..
2) Disabling the "lazy cam when running hangs the logisphere program
I have also had this problem in previous versions. ..
From what i read, I should be able to get more then 30 min of use after i get the free license. It is still timing out in 30 min. Aparently its unable..
From DavidP:
From what i read, I should be able to get more then 30 min of use after i get the free license. That is correct. My short visit in your c..
|
sse
|
6
|
2712
|
02/17/2006 - 08:18 AM
By
sse
|
|
|
[+/-]
LogiCam 0.7 release to Members
Changes:
- details here and there, I have not kept an exact record
Fixes:
- internal browser is more flexible, on failure external browser is calle ..
I tried very hard posting my question in "Questions and Answers" for members, but did not have access (only anonymous access). Perhaps, it is better ..
|
sse
|
1
|
2383
|
01/31/2006 - 09:45 PM
By
MichaelA
|
|
|
[+/-]
Frame Count Exceeded
I am running LogiSphere 1.2 with Free License.
When I use the "Configurable Live Stream" or "Cam Tilt/Pan with Chat" features, they would time out ..
There is no difference between the Pro and the Free version other than the limited run time for the free version.
License information
The setting y..
Thank you, Stefan. I missed that "Maximum JPEG frames" settings in "Devices" tab.
I appreciate the responsive support for the product SSE has demons..
After reading the licens types using the link above, I see the Free version stops working after six hours? So this software really isn't free -- I mu..
It depends what you mean with 'really use it' - if you want to keep your camera online 24/7, then you need to purchase the Pro License. If you're just..
|
KhoaT
|
4
|
2394
|
02/27/2006 - 06:13 AM
By
sse
|
|
|
[+/-]
LogiSphere Installation Bug
Hello,
First of all, great work on LogiSphere 1.2. Everything works cleanly and effectively. It's by far the best and most full featured piece of s ..
Thank you for reporting the problem.
There is not much I can do about it right now - there's not much to configure for the installation,
and the .NET..
Thanks for the response, Stefan.
Just to clarify, LogiSphere 1.2 works perfectly with .NET 1.1, as well as .NET 2.0. It's just that if a user has .N..
|
KhoaT
|
2
|
2332
|
01/16/2006 - 10:44 PM
By
KhoaT
|
|
|
[+/-]
LogiCam 0.6 released to Members
LogiCam has received a feature I considered a long time already:
Tilt/Pan and Zoom with any camera. LogiCam has now a digital zoom
which can be used ..
Logicam shows this error after changing the settings a few times
The page cannot be displayed
The page you are looking for is currently unavailable...
Maybe you changed the port number?
When that happens, right click the Icon in the system tray and choose
'Start Administration' - does that work?
..
The controls for panning and tilting seemed to only do digital panning and tilting. It did not use the motorized pan and tilt for the Logitech Orbit ..
Differences between LogiCam and LogiSphere can be found here..
I fixed what ever I did.Seems to be that that the built in admin controls the ones in logicam use internet explorer.When i open them in Firefox all se..
Hello ! I'm a little confused (doesn't take much though) I read that "LogiCam is the first LogiSphere Module" but after trying LogiCam, it looks like..
Hi Pete,
I understand your confusion.
let me quote the mail I wrote to those who requested information on Dec 7th:
I see LogiSphere as a core progr..
|
sse
|
7
|
2711
|
01/16/2006 - 07:42 PM
By
sse
|
|
|
CPU Utilization of LogiSphere
Hi SSE,
I realised that when i launched the logisphere, the utilization of this software is chewing up my CPU to as much as 50% of my HT 3.0ghz. Will ..
|
DennisL
|
0
|
3082
|
01/13/2006 - 04:22 PM
By
MichaelA
|
|
|
[+/-]
LogiSphere 1.2 released
In the Member area you'll find the download link for this version.
changes 1.2
The video size and mode are listed in a textual mode now,
you need ..
I purchased the Pro Lic 1.2 ver. After installing and when launching all I get it the splash window Logisphere 1.2 initializing......... screen. Progr..
did you deinstall the previous version before installing 1.2 ?
start LogiSphere in debug mode (logisphere.exe /debug=c:\debug.txt ), send me the resu..
I was also noticing a similar problem. What was strange was that even loading the standard Logitech Quickcam "Quick Capture" program wasn't working to..
From BillT:
I purchased the Pro Lic 1.2 ver. After installing and when launching all I get it the splash window Logisphere 1.2 initializing......... s..
As soon as I entered the license key, the motion detection stopped working. Please let me know what other information you need to assist. I love the s..
From Marcus:
The html-code I have done works fine local, but when I put it on the LogiSphere webserver the "regular" webcam picture dosen't ..
From AllisonM:
As soon as I entered the license key, the motion detection stopped working.
As fas as I know the license has nothing to do with the mo..
|
sse
|
7
|
2377
|
01/12/2006 - 11:19 AM
By
sse
|
|
|
LogiCam 0.3 unreleased
LogiCam is slowly becoming what it was meant to be.
The completely web configurable application works better every day.
Added a new directory to the ..
|
sse
|
0
|
2311
|
01/03/2006 - 05:29 PM
By
sse
|
|
|
[+/-]
LogiSphere 0.9.9j released
one small change:
since the changed <!--#include vserver --> mms link generation did not work for both me and Pete,
as we both have diff ..
Hi ! I noticed a problem over night, when it seems like the logisphere.seiz.ch server was down or a network timeout. It seems that if "listed" is ti..
I noticed a problem with the display of the flag for the country information.
It seems that one of the functions used are not thread safe,
in rare c..
LogiSphere 0.9.9j has been replaced by LogiSphere 1.2
Thanks to everybody who helped to find ways to improve the software.
Many user requests have b..
|
sse
|
3
|
2386
|
12/16/2005 - 05:30 PM
By
sse
|
|
|
[+/-]
LogiSphere 1.1 released to Members
New Features
Video Server events
Connection start and stop will be shown in the Server Message window
If audio feedback is on, they will also be aud ..
I installed 1.1 but when i clicked use sphere nothing happen. So i went back to 0.9.9j on the download page that works fine with pan/tilt.
I don't kno..
I have the same trouble... My Pan/Tilt don't work any more - The default Java pan/tilt page /java/chat.htm also has a note under the pan/tilt targ..
Thanks for reporting problems - I will look into this tomorrow.
Stefan
..
I did a quick test on my laptop (WinXP Pro) with a fresh install of LogiSphere 1.1 -
(unfortunately) I did not find any problem.
Andrew or Churton, ..
I uninstalled then reinstalled logisphere 1.1 and it worked. I think it must be some thing to do with the way we installed it.
Hope this helps
Andrew
..
Now that i have got LogiSphere to work i went to buy a LogiSphere Pro License.When i clicked LogiSphere Pro License there was not the page to enter my..
That seemed to work for me to... I uninstalled Logisphere and reinstalled 1.1 I had previously simply run the installer without uninstalling first...
When i clicked LogiSphere Pro License there was not the page to enter my licence.
I had seen this page before. How do i get it back.
Thanks Andrew
An..
From Churton:
I uninstalled Logisphere and reinstalled 1.1 I had previously simply run the installer without uninstalling first. I am glad to hear..
Hi i got the licence,don't know what i did the first time.I don't have a paypal account (not old enough) so bought it with my mums. Now logisphere say..
|
sse
|
10
|
2644
|
12/13/2005 - 06:13 PM
By
AndrewG
|
|
|
[+/-]
Logisphere 0.9.9g released
this release is mostly to release my work load...
I had so many registrations with bogus names and bouncing email addresses that
I had to add a bit ..
Since this last version upgrade I cannot get the web server to start. I get an error message saying "cannot connect to logisphere.siez.ch" Is the se..
Hi Budd
No, the system is not down.
There are some additional tests now, maybe those required more than the 10 seconds LogiSphere waits for the requ..
Your system runs my software. Before you configured LogiSphere, you saw the following popup:
I'm not sure what that statement actually means... Do..
Where was this pop-up again? I just reinstalled logisphere from scratch and did not see any popup with this information.
..
Does this mean you are granting a license to use your software ONLY if it makes the connection to the mother ship when it starts?
yes.
That precludes..
From Churton:
Where was this pop-up again? I just reinstalled logisphere from scratch and did not see any popup with this information.
rename your c..
Don't get me wrong... your software is very elegant and I am very happy with it.
is that a testimonial I can use on the website?
Most certainly! ..
Thank you for your answer.
What do you mean by password protected... there is no password prompt.That is entirely up to you - you may password protec..
I think the additional 10 seconds is a good idea, in the past I have had problems every so often with Logisphere not connecting to the server ontime. ..
|
sse
|
9
|
2656
|
11/20/2005 - 07:49 AM
By
Norman
|
|
|
[+/-]
LogiSphere 0.9.9i released
Changes:
- mms include <!-- include vserver -->
to generate the mms link, picture URL is used instead of Server URL:
mms replaces http,
v ..
Hi :-)
What does "unreleased" mean in this case?
Ready, but not yet available to public?
In any case, good job Stefan!
Christophe..
I was meant to be 'released' - I'll change it just now
..
Hi, my picture url is:
http://hostname:3080/current.jpg
the vserver tag returns: mms://hostname:3080
(should be 3090)
The frame rates look good ..
Hello I am New here and just bought a new VIMICRO MINI PC CAM 301X, and downloaded your LOGISPHERE, How compatable are they, and how do I configure t..
the vserver tag returns: mms://hostname:3080
(should be 3090)
I might have mixed something up. I will check and correct on monday.
Thanks for letti..
Hi William
How compatable are theyI am sure you are going to let us know
how do I configure the settings so I can send someone a recorded Video Messa..
|
sse
|
6
|
2286
|
11/13/2005 - 07:43 PM
By
sse
|
|
|
[+/-]
LogiSphere 0.9.9h released
I upgraded the development environment to Visual .NET Studio 2003.
The only difference I noticed so far is a small change in the installation file ( ..
Hi Stefan ! Two things I noticed today with this version:
1) The camera frame rate box can cause problems if I type in a number "27,0" for example a..
1) The camera frame rate box can cause problems if I type in a number "27,0" for example and save the config, startup requires its an intege..
|
sse
|
2
|
2247
|
11/11/2005 - 02:03 PM
By
sse
|
|
|
LogiSphere 0.9.9f released to Members
Fixes:
- chat log appends (in previous versions the log was overwritten on restart of the program)
- rearranged image sizing code to make sure also ..
|
sse
|
0
|
2229
|
10/31/2005 - 03:41 PM
By
sse
|
|
|
LogiSphere 0.9.9e released
Help Integration
now LogiSphere ships with a help file,
F1 key works on all forms
This version has received a tucows.com 4 cow rating and can be fou ..
|
sse
|
0
|
2336
|
10/20/2005 - 06:23 PM
By
sse
|
|
|
[+/-]
LogiSphere 0.9.9 released
new features:
support of server side includes
include files
<!--#include file="anyfile.inc" -->
include a file from the local directory
..
Hi ! I like the "LogiSphere sized applet Demo" and maybe I could suggest something.
1) Could it be possible for the client to set somewhere (from th..
Hi,
Things look really good from my end.. As a matter of fact the only problem that I currently have it getting logged in to this forum.. Sometimes..
Hi !
I think there's a bug in this version. If I use http://<server>ort/motion.mjpg?20051005800/*
(with and without the size,fps options) it..
Hi ! Funny how one doesn't notice things only after a few months.. I see the date in the caption
is "month-date-year".. Any chance of using the re..
|
sse
|
4
|
2413
|
10/13/2005 - 10:35 AM
By
Pete
|
|
|
SSI: Server Side Includes
create dynamic pages with server side includes
Include files, web pages, scripts
Command syntax
Any feedback on this? ..
|
sse
|
0
|
2284
|
10/12/2005 - 03:09 PM
By
sse
|
|
|
LogiSphere 0.9.8 released to Members
new features:
- all pictures and motion jpeg streams can be scaled (eg. size=300x200)
- frame rate parameter for motion jpeg (eg. fps=2, min. 0.1) ..
|
sse
|
0
|
2330
|
09/22/2005 - 12:07 PM
By
sse
|
|
|
LogiSphere 0.9.7 released to Members
new feature
- replay of captured pictures supports filtering of returned pictures
http://localhost:8080/motion.mjpg?20050914*
will show files s ..
|
sse
|
0
|
2203
|
09/19/2005 - 12:02 PM
By
sse
|
|
|
[+/-]
LogiSphere 0.9.6 released to Members
New Features
- lazycam only requests picture from camera driver if needed for webserver: much lower CPU usage
- activity display: delivered pict ..
Installed 0.9.6. Currently testing. No problems to report...
Couple of things...
Previous version would not recognize my orbit anymore, so it was put on back burner. Installed 096 this morning, and it picked u..
Further to the above... the lazycam option now seems to work properly. Still can't control the camera through the program tho, either locally or remot..
I cannot find anything unusual in the log file - other than the 10s it took for the cam driver to get ready.
Try renaming config.txt and start with t..
Tried that... no luck, I still can't move the camera around from within LogiSphere, or from the webpage.
..
Hi ! I'm having some trouble with the jave/motionreplay. Its awfull slow to load on my computer, could it be because there are nearly 83000 files in..
<<<<<<<please see end of this post for yet another update>>>>>>>>>>
Update to my above issue... I ..
Hi Real,
I am glad you got it to work.
I figured out, that HKLM\SOFTWARE\Microsoft\VfWWDM Mapper contains the active devices.
Is your device listed..
Hi Pete
Hi ! I'm having some trouble with the jave/motionreplay. Its awfull slow to load on my computer, could it be because there are nearly 8300..
Yes, my device is listed at that location. Just for the fun of it, I "re-selected" my device under logisphere, and saved the settings.. I was unable t..
|
sse
|
10
|
3265
|
09/15/2005 - 01:56 AM
By
Real
|
